|Pile diameter:||300~1050mm||Max.rod pressure:||280kN|
|Crowd stroke:||135mm||Max. crowd pressure:||30MPa|
|Max. cylinder required:||20L/min||Quantity/8h:||40/8h|
|Max. single cutting height:||≤300mm||Single module weight:||100kg|
|Type:||hydraulic pile breaker||Condition:||new|
1.High efficiency. 3 piles one day by man, 80 piles one day by RAY pile breaker.
2.Low noise,environment-friendly. Cacophony by electric hammer.It is little noises during operation with full hydraulic drive
3.Low-cost.High labor costs. Ray pile breaker: Operation easily with fewer workers.Saving more time .
4.Safer. Manual operation risk is high, Ray pile breaker: Full automatic operation,it can be applied for construction on com-plex land-form.
KP315A Round Pile Breaker (13 Modules Combination)
|Pile Diameter||300~1050mm||Max Rod Pressure||280 KN||Crowd Stroke||135mm|
|Max Crowd Pressure||30 Mpa||Max Cylinder Required||20 L/min||Quantity/8h||60/8h|
|Max Single Cutting Height||400mm||Matched Machinery Tonnage||≥20T||Sinle Module Weight||100 KG|
|Operating Size||2098*4840mm||Overall Weight||1.7T||Single Module Size||645*444*316mm|
|Module Number||Diameter Range||Platform Weight||Weight||Height Of Single Crush Pile|
When it is on operation, the counter( acting) force will produce behind of the module.
it reduce the service life of cylinder.
The frame service life is short.
When it is on operation, the chisel will work on the pile.It will produce counter(acting) force to the front of module, the pressure works on the structural parts not on the connection.
The cylinder and frame service life is longer.
The mechanical stress is put pressure on the structural parts not on the connection when it worked and the oil cylinder which is specially-made by Sany used the double oil seal.
There are 7 kinds of pin axle holes to match differece shaft.To prevent the form of pile breaker changed when it worked.